One quart equals 0.946 litres. That single fact is the whole conversion — multiply any number of quarts by 0.946 and you have litres. The reason this page exists at all is that real cooking rarely hands you a neat whole number: recipes ask for half a quart, a quarter of a quart, or three and a half, and the measuring jug in your cupboard may be marked in the other unit entirely. Below is the full table for every amount you are likely to meet, plus worked examples and the US-versus-imperial warning that matters more than the arithmetic.

1 Quart in Litres conversion table

Quart Litres
0.25 quarts 0.236 litres
0.5 quarts 0.473 litres
0.75 quarts 0.71 litres
1 quart 0.946 litres
1.5 quarts 1.419 litres
2 quarts 1.892 litres
3 quarts 2.838 litres
4 quarts 3.784 litres
5 quarts 4.73 litres
8 quarts 7.568 litres
10 quarts 9.46 litres

Quick reference:

  • 0.25 quarts = 0.236 litres
  • 0.75 quarts = 0.71 litres
  • 1.5 quarts = 1.419 litres
  • 3 quarts = 2.838 litres
  • 5 quarts = 4.73 litres
  • 10 quarts = 9.46 litres

How to convert quarts to litress

This conversion needs no scale, no density table and no judgement: it is a defined ratio between two volume units. Take your amount in quarts, multiply by 0.946, and you have litress. The reverse is division by 0.946. The figures in the table are rounded to a sensible precision for cooking — 473.2 ml for a pint rather than 473.176473 ml — and the rounding error is far smaller than the error in reading any measuring jug. What is not rounding error, and what you should check every time, is the US-versus-imperial question: the imperial pint (568.26 ml), quart (1136.52 ml) and gallon (4546.09 ml) are each about 20% larger than their US namesakes. If your recipe comes from a British source, use the imperial figures, not the ones on this page.

Why this conversion comes up

The practical reason to know this conversion is that liquid ingredients do not forgive estimation the way dry ones sometimes do. A stock that is a pint short will not cover the bones; a brine that is a quart over will drown the salt balance; a punch that is a gallon out will serve half the guests or twice as many. Volume-to-volume conversion is exact, so there is no excuse for guessing — and no density table to argue about, because a pint of water, a pint of milk and a pint of oil are all the same volume.

Worked examples

Converting a cookbook recipe

An old cookbook gives a custard base as 2 quart of milk, but your measuring jug is marked in litres. 2 quart is 1.892 litres. Custard is unforgiving about liquid: too much and it will not set, too little and it scrambles. Convert once, write it in the margin, and measure carefully.

Iced tea for a barbecue

You are brewing iced tea for a barbecue and the recipe makes 3 quart. Your dispenser is marked in litres, and 3 quart is 2.838 litres — which tells you whether one batch fills the dispenser or whether you need to brew twice. Brew it strong and add ice at serving time rather than diluting the batch in advance.

A bread dough with a lot of water

A bread recipe calls for 1.5 quart of water and your scale measures in litres. 1.5 quart is 1.419 litres, which you can weigh directly — and for bread, weighing water is better than measuring it, because a gram of water is a millilitre of water and the scale does not care about the meniscus.

Practical guidance

Doubling and halving are where small errors become large ones. A rounding error of 10 ml in a single cup is nothing; the same error doubled across a party-sized batch is a noticeable difference in a sauce or a dough. Convert with the full factor, round only at the end, and write the converted amount on the recipe so you only do the arithmetic once.

Common mistakes to avoid

  1. Using an imperial pint, quart or gallon when the recipe means US measures. Using an imperial pint, quart or gallon when the recipe means US measures. An imperial pint is 568.26 ml, about 20% larger than the US pint (473.18 ml). A recipe that says 'pint' alongside cups and tablespoons is American; one that says 'pint' alongside grams and millilitres is usually British. When in doubt, convert from the millilitre figure on the jug.
  2. Reading a measuring jug from above instead of at eye level. Reading a measuring jug from above instead of at eye level. The meniscus reads higher from above, so you add too little liquid. Put the jug on a flat surface, bend down, and read the bottom of the meniscus at eye level.
  3. Measuring liquid in a dry measuring cup. Measuring liquid in a dry measuring cup. Dry cups are meant to be filled to the brim and levelled; liquid sloshes and the brim is not a reliable line. Use a jug with a spout and graduations for liquids.
  4. Rounding twice. Rounding twice. If you convert and then scale, or scale and then convert, round only once at the end. Rounding at each step compounds the error, and across a party-sized batch it adds up to a real difference.

Frequently asked questions

Should I round the result?

For everyday cooking, rounding to one decimal place or the nearest whole number is fine — the error is smaller than the error in reading a jug. For preserving, brining and custards, where the liquid amount is load-bearing, keep one extra decimal and measure carefully. Never round twice: convert, then scale, or scale, then convert, but round only at the end.

How many litress are in 2 quarts?

2 quarts are 1.892 litress. The table above lists the common amounts, and the same multiplication works for any amount: multiply the number of quarts by 0.946.

Does the conversion change for hot liquids?

No, for cooking purposes. Liquids expand slightly when hot, but the change is well under 1% between fridge temperature and simmering, and far smaller than normal measuring error. Measure hot liquids in a heatproof jug and do not worry about thermal expansion.

Why do some sources give a slightly different number?

Because they round differently, or because they are quoting imperial rather than US measures. The US figures are fixed by definition, so a source that gives a different number is either rounding to fewer figures or using the imperial pint, quart or gallon. Check which system the source uses before trusting its number.

Is 1 quart exactly 0.946 litres?

Yes, for US customary measures it is exact by definition. The US quart is defined in millilitres, and the ratio to the litres follows from that definition, so 0.946 is not a rounded estimate — it is the defined value. The figures in the table are rounded only for display (for example 473.2 ml for a pint rather than 473.176473 ml), and the rounding error is far smaller than the error in reading any measuring jug.

Related links