1 litre = 1.0567 quarts. Cups, spoons, pints and litres are all measures of the same thing — volume — and this page converts between two of them. The factor is fixed by definition, not measured in a kitchen, so it is the same for every ingredient, every recipe and every brand of measuring cup. What follows is the full table for the amounts you actually cook with, worked examples from real recipes, and the mistakes that catch people out even when the maths is right.
This is one of the conversions that comes up again and again once you start cooking from recipes written in different countries. A British cookbook, an American blog and a metric website can all describe the same amount of liquid in three different units, and the dish is the same dish. The table below covers the amounts that actually appear in recipes, from a single spoonful to a full pot, so you can find your amount without doing the arithmetic yourself.
Conversion table
| Litres | Quarts |
|---|---|
| ¼ litre | 0.2642 quart |
| ½ litre | 0.5283 quart |
| ¾ litre | 0.7925 quart |
| 1 litre | 1.0567 quarts |
| 1.5 litres | 1.585 quarts |
| 2 litres | 2.1134 quarts |
| 3 litres | 3.1701 quarts |
| 4 litres | 4.2268 quarts |
Read the table in either direction. Going from litres to quarts, multiply by 1.0567; going back, divide by 1.0567 or multiply by 0.9464. The middle rows are the ones recipes use most — 1 litre is 1.0567 quarts, and 2 litres is 2.1134 quarts. If your amount is not in the table, multiply it by 1.0567 and you have the answer. For a quick check: 1 litre is 1.0567 quarts, 2 litres are 2.1134 quarts, and 10 litres are 10.5669 quarts.
Worked examples
Checking a measuring jug. Jugs are not always honest. Pour ¾ litre of water into the jug — that should read 0.7925 quart on the quarts scale. If it reads noticeably more or less, trust the litres: measuring cups and spoons are made to a standard, while cheap jugs are often printed a few percent out. A jug that is wrong by 5% will put 5% too much liquid in every cake, soup and sauce you make with it, which is enough to notice.
Working from a video recipe. The cook on screen measures ¾ litre and your set only has a quart measure. That is 0.7925 quart — pause the video, count them out, and carry on. Video recipes are the worst for mixed units, because the cook never stops to convert for you. Keep this page open on your phone while you cook and the pause button becomes your conversion chart.
A recipe written in the other system. You find a lemon drizzle cake recipe from a metric cookbook that lists 3.1701 quarts, but your measuring cups are marked in litres. That is 3 litres — a familiar measure again. This is the most common reason people look this conversion up mid-cook: one recipe, two measuring systems, and dinner in an hour. Convert the whole recipe to one system before you start, write the converted amounts on the page, and you will not have to do the arithmetic with wet hands.
How the conversion works
The US litre is defined as 1000 ml, and the quart is defined as 946.3529 ml. Divide the first by the second and you get 1.0567 — that is the whole derivation, and it is why the conversion is exact rather than approximate. No kitchen experiment was needed to establish it; the units were defined this way, so the ratio follows from the definitions. That is also why the same factor appears in every reliable conversion chart: there is only one right answer, and every source that uses US customary units agrees on it.
The one thing to check is which litre your recipe means. This page uses the US customary litre throughout. A metric cup is 250 ml, an imperial cup is 284 ml, and older recipes sometimes use a 'cup' that means whatever cup the writer had in the cupboard. If a recipe from outside the US gives an amount that looks wrong after converting — a cake with far too much liquid, a soup that is far too thin — the cup is the first suspect. Convert the recipe to grams once, write the grams on the recipe card, and the question never comes up again.
Rounding deserves a note too. The exact factor is 1.0567 to four decimal places, and the full value runs further (1000.00 ml divided by 946.35 ml). For everyday cooking, rounding to two or three significant figures is fine: a 1% rounding error is invisible in a soup and barely noticeable in a cake. But round only at the end. If you round the factor and then multiply by a large amount, the rounding error grows with the amount — so keep the full factor through the calculation and round the answer, not the factor.
Volume is not weight
A conversion between two volume units is the same for every ingredient, but a conversion between volume and weight is not — and confusing the two is the most common conversion mistake in cooking. A cup of all-purpose flour weighs about 120 g spooned and levelled (King Arthur Baking), a cup of granulated sugar about 198 g, a cup of butter about 227 g, a cup of milk about 244 g (USDA), and a cup of honey about 336 g. All of those weights are approximate, because they depend on how the ingredient is measured: flour is spooned and levelled, brown sugar is packed at about 213 g a cup, and honey is poured.
Flour weight is the most disputed conversion in baking. King Arthur Baking lists 120 g per cup spooned and levelled, while other sources quote 125 g, 130 g and up to 142 g for a scooped cup. We use the King Arthur spooned-and-levelled value as primary, and the gap is a warning: if you scoop flour instead of spooning and levelling it, you can add 20 g or more per cup, which is enough to make a cake dry. Granulated sugar carries a smaller dispute — King Arthur lists 198 g per cup and the USDA rounds it to 200 g, a difference of rounding rather than a real disagreement. When a recipe matters, verify with a kitchen scale: weigh the ingredient instead of measuring it by volume, and every dispute on this page disappears.
Common mistakes
The most common mistake is mixing up volume and weight: a fluid ounce is a volume, an ounce is a weight, and they are only the same number for water. A cup of flour and a cup of honey are the same volume and very different weights. The second mistake is the cup itself: a US cup is 236.59 ml, a metric cup is 250 ml, and an imperial cup is 284 ml, so a recipe that just says 'cup' without saying which cup can be off by a fifth before you start. The third mistake is the pint: a US pint is 473 ml and 16 fluid ounces, while an imperial pint is 568 ml and 20 fluid ounces — a big difference in a beer batter or a stock pot. The fourth is the tablespoon: a US tablespoon is 14.79 ml, but an Australian tablespoon is 20 ml, so an Australian recipe measured with US spoons is short by a quarter. The fifth mistake is rounding too early: converting each ingredient separately and rounding each one lets small errors add up, so convert once, at the end, and keep the full number until the final step. Check which system your recipe uses before you measure anything, and the rest is simple arithmetic.
Frequently asked questions
What is the quickest way to measure 2 litres in quarts?
Use a measuring jug marked in quarts and fill it to the 2.1134 quarts line, reading at eye level on a flat surface. Counting it out in litres one at a time is slower and easier to miscount. If you do not have a jug, a kitchen scale works for water-based liquids, since 1 ml of water weighs about 1 g — but that shortcut only holds for water-like liquids, not for oil or honey.
Why do recipes use litres instead of quarts?
Mostly tradition and the tools cooks already own. American recipes were written for American measuring cups, and metric recipes for metric jugs, and neither is going to change. The units themselves are equally good for measuring volume — the difference is only what your kitchen is equipped for. Rather than buying a new set of measures for every recipe, convert once and cook with the tools you have.
How many quarts are in 1 litre?
Exactly 1.0567 quarts. Multiply any number of litres by 1.0567 to get quarts — for example, 1.5 litres is 1.585 quarts. The conversion is exact because both units are defined volumes in the US customary system.
What is 1 litre in quarts?
1.0567 quarts. Multiply 1 by 1.0567: 1 × 1.0567 = 1.0567. This is a common recipe amount — a third of a cup of cream, a few spoonfuls of oil — so it is worth knowing it is a straight multiplication with no special case.
Is a US litre the same as a metric or imperial litre?
Not always, and this is the biggest trap in unit conversion. This page uses the US litre (1000 ml). A metric cup is 250 ml, an imperial cup is 284 ml, a US pint is 473 ml while an imperial pint is 568 ml, and an Australian tablespoon is 20 ml against the US 14.79 ml. If your recipe comes from outside the US, check which system it uses before converting — the factor on this page is correct for US measures only.